BMW E30 4 doors Drift Specs

Coddington

Active Member
Joined
Jan 14, 2005
Messages
314
Location
France / Switzerland
Car(s)
VFR 800 98 + VTR SP1 00
http://img300.imageshack.**/img300/48/bimmer007largeln5.jpg
http://img232.imageshack.**/img232/4813/bimmer011largehb7.jpg
http://img206.imageshack.**/img206/3507/bimmer008largeqm4.jpg
http://img146.imageshack.**/img146/9329/bimmer009largelc2.jpg
http://img223.imageshack.**/img223/4848/bimmer012largedh5.jpg
http://img146.imageshack.**/img146/2774/bimmer035largenv8.jpg
http://img221.imageshack.**/img221/3923/bimmer026largeby3.jpg
http://img165.imageshack.**/img165/7862/bimmer037largebn0.jpg
http://img230.imageshack.**/img230/2930/bimmer028largeti7.jpg
http://img223.imageshack.**/img223/7194/bimmer048largelt4.jpg
http://img207.imageshack.**/img207/6023/bimmer043largexf2.jpg
http://img146.imageshack.**/img146/3284/bimmer018largezx5.jpg









325IX (4WD) => 325I (RWD)
Welded differential, final gear of 3.90 or 4.10 (i don't remember), empty stainless muffler, springs - 40mm, you can see the rest of the car on the pics ;)

Yeah, i know, i must remove those stickers... too lazy to do it now :lol:
 
Nice!

Tho IX has a disadvantage... Caster is very VERY low. Due the 4wheel drive :(
 
^ Yeah IX rules on ice and snow :thumbsup:
 
That looks like quite a fun bit of machinery. Is that skidplate just aluminum? I need to work a proper one out for my Celica, the factory plastic bits don't cut it.
 
That looks like quite a fun bit of machinery. Is that skidplate just aluminum? I need to work a proper one out for my Celica, the factory plastic bits don't cut it.
I give it water, oil and tires and it brings me a bunch of fun :p
The skidplace is in aluminum, probably the only part not rusted on the car :lol:
 
I give it water, oil and tires and it brings me a bunch of fun :p
The skidplace is in aluminum, probably the only part not rusted on the car :lol:

It runs on water and oil? Mine runs on petrol :p
 
Top