Awhile ago (uh, November 2017) I bought a project car.
Finally getting around to projecting it.
I'll unveil it tomorrow.
Here's a hint:
Finally getting around to projecting it.
I'll unveil it tomorrow.
Here's a hint:
EyeMWing;n3555216 said:Awhile ago (uh, November 2017) I bought a project car.
Finally getting around to projecting it.
I'll unveil it tomorrow.
Here's a hint:
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/forums.finalgear.com\/image\/gif;base64,R0lGODlhAQABAPABAP\/\/\/wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw=="}[/IMG2]
captain_70s;n3555332 said:In a shocking turn of events it transpires that ignoring a pronounced bottom end knock for 6 years and 11,000 miles will not simply cause it to fix itself. Indeed a big end bearing may well attempt an escape at 65mph on the A74 just outside Lockerbie.
captain_70s;n3555332 said:In a shocking turn of events it transpires that ignoring a pronounced bottom end knock for 6 years and 11,000 miles will not simply cause it to fix itself. Indeed a big end bearing may well attempt an escape at 65mph on the A74 just outside Lockerbie.
ScarFace88;n3555352 said:What is it with Lockerbie and things blowing up?
EyeMWing;n3555243 said:Works on my machine. Lets just go ahead and blame the forums.
Here's the teaser image again:
Spectre;n3555348 said:Please tell us that you're going to finally scrap that POS and not dump another fortune in time or money into resurrecting that thing yet again?
captain_70s;n3555375 said:
Plans are already in place to pull the engine out at the side of the road outside my flat and drop in an identical one from a Mk4 Spitfire.
"Insanity is repeating the same mistakes and expecting different results." - Narcotics Anonymous
captain_70s;n3555375 said:
Plans are already in place to pull the engine out at the side of the road outside my flat and drop in an identical one from a Mk4 Spitfire.
captain_70s;n3555332 said:ignoring a pronounced bottom end knock for 6 years and 11,000 miles
captain_70s;n3555387 said:It seems silly to scrap a car I've just fitted a new rotor arm to and recently lubricated the carburettor linkages on for something as trivial as an engine...
Labcoatguy;n3555389 said:What else are you going to idiotically ignore this time around?